Colorbond Roof Profiles: Comparing Custom Orb, Trimdek, and Klip-Lok

Colorbond Roof Profiles: Comparing Custom Orb, Trimdek, and Klip-Lok

Selecting the ideal Colorbond roof profile involves considering three key factors: your roof's pitch, the aesthetic you desire, and the method of securing the sheets. For most residences along the NSW Central Coast, the primary options are Custom Orb, Trimdek, and Klip-Lok. At AWS Roofing, we install all three profiles in both Colorbond and Zincalume steel. This comprehensive guide offers a side-by-side comparison to assist you in making an informed choice for your new roof.

Homeowners often contemplate roof profiles after enduring years with an outdated roof. You may have repeatedly patched the same leak, or the existing tiles or sheets may have reached the end of their lifespan. Roof repairs have their limits. When it comes to replacing your roof, the profile you select will significantly influence its appearance and performance over the decades to come.

Light coloured corrugated metal roof with gutter guard mesh along the edge

What Exactly Are Colorbond Roof Profiles?

A Colorbond roof profile refers to the shape into which the steel sheet is rolled. Colorbond is the brand of the steel and its protective colour coating. The profile includes the pattern of ribs or curves that are pressed into the material. Lysaght, the manufacturer of Custom Orb, Trimdek, and Klip-Lok, positions itself as a leader in shaping Colorbond steel.

The profile also determines how flat your roof can be. Colorbond specifies that the profile of the roofing material dictates the minimum pitch it can be installed at. A corrugated profile usually requires at least a 5-degree pitch, while certain profiles can function at pitches as low as 1 degree. This crucial information eliminates some profiles for low or skillion roofs even before aesthetics are considered.

Comparative Analysis of Custom Orb, Trimdek, and Klip-Lok Roof Profiles

The table below presents data published by Lysaght on its profile pages for the standard versions of each sheet. Cover width refers to how much roof area each sheet covers once installed. Rib height indicates how tall the ribs are. Minimum roof slope denotes the lowest pitch recommended by Lysaght for each sheet.

Profile Aesthetic Cover Width Rib Height Minimum Roof Slope Sheet Securing Method
Custom Orb Classic corrugated ripple 762mm 16mm 5 degrees Screws pass through the sheet
Trimdek Bold trapezoidal ribs with fluted pans 762mm 29mm 2 degrees Screws pass through the sheet
Klip-Lok 406 Bold ribs rising from wide, fluted pans 406mm 41mm 1 degree Hidden clips, no exposed screws
Klip-Lok 700 Hi-Strength Bold ribs rising from wide, fluted pans 700mm 43mm 1 degree (subject to design provisions being met) Hidden clips, no exposed screws
Data sourced from Lysaght's Custom Orb, Trimdek, and Klip-Lok profile pages, as well as the Lysaght Custom Orb and Trimdek design and installation guides, verified November 2026.

Lysaght offers several versions of Klip-Lok, and availability may vary by state. Klip-Lok 406 and Klip-Lok 700 Hi-Strength are both listed as options in New South Wales. When comparing quotes, it’s important to clarify which version of each profile is being quoted.

Custom Orb Roof: Is Corrugated Still a Reliable Choice?

Absolutely. Lysaght refers to Custom Orb as the original corrugated steel profile, trusted by Australians for generations. Its versatility suits various architectural styles, from heritage homes to modern builds, and it’s the design many envision when picturing a Colorbond roof.

Custom Orb can be installed flat or in a sprung curve, making it ideal for curved roof sections. For a bullnose curve, refer to the Custom Blue Orb guide, as Custom Orb is not designed for machine curving. Its low ripple height of 16mm provides a soft and even appearance from the street. The primary limitation is its pitch. With a minimum roof slope of 5 degrees, Custom Orb is unsuitable for very low skillion roofs or nearly flat extensions.

If your roof has a reasonable pitch and you prefer a traditional aesthetic, Custom Orb is an excellent match. It works well in neighbourhoods where the new roof needs to harmonise with older corrugated roofs.

New light coloured commercial metal roof with roofers working

Trimdek Roof: What Makes It a Preferred Choice for New Installations?

Trimdek is favoured for its compatibility with low pitches and its sleek, modern appearance. Lysaght describes Trimdek as featuring bold trapezoidal ribs and subtle fluting in the pans. It can accommodate roof pitches as low as 2 degrees, making it suitable for skillion roofs, extensions, and pergola roofs where Custom Orb may not suffice.

Trimdek boasts impressive spanning capabilities, allowing for wider support spacings, which can minimise the amount of framing required. With ribs standing at 29mm, almost double the height of Custom Orb, Trimdek delivers a more pronounced, striped appearance. As highlighted on our metal roofing page, Trimdek is available in long lengths, enabling one sheet to extend from the ridge to the gutter without requiring end laps.

This profile is a great option for contemporary homes, low-pitched roofs, and outdoor structures. For instance, on a recent pergola roof in Gosford, AWS Roofing utilised 0.48 Trimdek in Colorbond Ironstone, paired with two sheets of tinted polycarbonate to allow natural light to filter through. You can explore this project further in our guide to pergola and verandah roof replacement on the Central Coast.

Klip-Lok Roofing: When Is It Beneficial to Use Hidden Clips?

Klip-Lok is ideal for very low pitched roofs and for homeowners who prefer no visible screws on the surface. Lysaght states that Klip-Lok employs a concealed clip system to ensure optimal watertightness. This profile is appropriate for near-flat roof planes, ranging from large commercial structures to low-pitched residential roofs. The tall ribs and wide pans create a sharp, architectural look.

Since the clips are located beneath the sheet, there are no visible screw heads on the roof's surface. Klip-Lok 406 and Klip-Lok 700 Hi-Strength have a minimum roof slope of 1 degree, the lowest among the three profiles. careful planning is necessary for any elements that penetrate the roof, such as whirlybirds or solar brackets. Our post on Klip-Lok installation best practices provides more detailed insights on this topic.

Klip-Lok is also a preferred choice for commercial buildings, where expansive, low roofs are common. If you are considering a new roof for a shed, workshop, or business, our commercial roofing page outlines how AWS Roofing manages larger projects.

How Can You Select the Ideal Colorbond Roof Profile for Your Residence?

Begin by assessing the pitch of your roof, then consider the aesthetic you wish to achieve. The pitch dictates which profiles are feasible, while the style of your home influences which profile will be most visually appealing. Here are some questions to narrow your options:

  • Roof pitch: A pitch below 5 degrees eliminates Custom Orb, while below 2 degrees leaves only Klip-Lok as an option.
  • Home style: Traditional or heritage homes often pair well with Custom Orb, whereas modern designs typically favour Trimdek or Klip-Lok.
  • Visible screws: If you prefer no exposed screws, Klip-Lok, with its hidden clips, is the ideal choice.
  • Curved sections: For roofs with curves, Custom Orb can be sprung to accommodate them.
  • Consistency with other roofs: A new verandah or extension roof generally looks best when it matches the main roof's profile.
  • Colour selection: Lysaght notes that the full range of Colorbond colours is offered for Custom Orb and Trimdek, while colour availability may differ for Klip-Lok based on profile and location.

When requesting a quote, specify the profile and the Colorbond or Zincalume product by name. This makes it straightforward to compare quotes accurately, as similar-sounding roofs on paper may utilise different sheets. AWS Roofing provides free quotes that detail the scope of work in writing, ensuring you understand what is included before any work commences.

Do Colorbond Roof Profiles Vary for Coastal Homes?

The profile itself remains unchanged, but the underlying steel may vary based on your proximity to the ocean. Colorbond offers straightforward guidelines for coastal homes. If your residence is situated more than 200 metres from breaking surf, standard Colorbond steel is recommended. If located between 100 and 200 metres from breaking surf, Colorbond Ultra steel is the suggested material, measured from the high water mark.

Lysaght lists the Ultra range alongside Custom Orb, Trimdek, and Klip-Lok. Colorbond emphasises that actual performance is influenced by local conditions, including prevailing winds and areas that do not receive rainfall. For homes situated closer than 100 metres to the surf, Colorbond directs you to its technical bulletin on steel roofing selection. This information is particularly relevant on the Central Coast, where numerous homes are located near the beaches. Our guide to selecting the best roofing option for Central Coast properties examines coastal-grade steel and local conditions on a suburb-by-suburb basis.

How to Choose a Profile When Replacing an Old Roof

A re-roofing project presents the perfect opportunity to select a new profile, as the old roof is completely removed. If you are transitioning from concrete or terracotta tiles, you’re not limited by an existing sheet, allowing any profile that suits the pitch to be a viable option. Our tile to metal roof conversion page details how a tile roof is replaced with a new Colorbond roof.

For many homeowners, a re-roofing occurs after years of patching leaks. The same issue may recur, or the old sheets could be rusting through. At this juncture, the focus shifts from the old roof to the new one, with the profile emerging as one of the initial decisions to be made. You can review the entire process of a full roof replacement, from removing the old roof to installing new sheets, sarking, and flashings, on our roof replacement page.

Colour selection is another significant decision. Colorbond offers 22 core colours, including six in a matte finish. Colours viewed on a screen are only approximations, so viewing a physical sample of your chosen profile is beneficial. Explore the range on our Colorbond colours page, or visit our Charmhaven showroom at 3/3 O’Hart Cl, Charmhaven NSW 2263 to see Colorbond colours in person.

Common Questions about Colorbond Roof Profiles

Which Colorbond roof profile is ideal for low pitched roofs?

Klip-Lok and Trimdek are the recommended profiles for low pitched roofs. Lysaght specifies Klip-Lok 406 and Klip-Lok 700 Hi-Strength with a minimum roof slope of 1 degree, while Trimdek can accommodate pitches down to 2 degrees. Custom Orb requires at least a 5-degree pitch, making it unsuitable for very flat skillion roofs.

How do Trimdek and Custom Orb differ?

Custom Orb features the classic corrugated ripple design, with a 16mm rib and a minimum roof slope of 5 degrees. Trimdek boasts bold trapezoidal ribs that are 29mm high and can be installed at pitches down to 2 degrees. Both profiles cover 762mm per sheet. Custom Orb is ideal for traditional homes and curved structures, while Trimdek is better suited for modern homes and lower pitches.

Does Klip-Lok have visible screws?

No, Klip-Lok sheets are secured using concealed clips located beneath the surface, eliminating visible screw heads. According to Lysaght, this clip system ensures exceptional watertightness. Installation guides for Custom Orb and Trimdek indicate that screws penetrate the sheeting into the supports.

Should I opt for Colorbond Ultra if I reside near the beach?

It depends on your distance from breaking surf. Colorbond advises using standard Colorbond steel for homes situated more than 200 metres from breaking surf, and Colorbond Ultra steel for those between 100 and 200 metres. For residences closer than that, Colorbond recommends consulting its technical bulletin on steel roofing selection.

Are all Colorbond colours available across every profile?

Not necessarily. Lysaght states that the complete Colorbond colour range is available for popular profiles like Custom Orb and Trimdek. for Klip-Lok, colour availability may differ based on profile and location. It's advisable to verify the colour and profile together when reviewing your quote.

Request a Complimentary Quote for Your New Colorbond Roof

If you are considering Custom Orb, Trimdek, or Klip-Lok for your new roof, AWS Roofing is here to help you select the profile that best suits your roof pitch, home design, and location. AWS Roofing is licensed (licence 247575C), fully insured, and WorkCover accredited, with all work guaranteed in writing. Have questions about a new roof? We’re ready to assist. Contact us for a free, no-obligation quote.

Original Article First Published At: Colorbond Roof Profiles for a New Roof: Custom Orb, Trimdek and Klip-Lok Compared by AWS Roofing

WriteBuff, is proudly based in Australia, is a dedicated content syndication platform serving trade publications and niche professional audiences across sectors like construction, manufacturing, automotive, and more. Their mission is to amplify valuable trade content by distributing it to relevant, high-authority partner platforms, enhancing visibility and engagement for both authors and publishers.

Comments

No comments yet. Why don’t you start the discussion?

Leave a Reply

Your email address will not be published. Required fields are marked *