Bidet Seat Fit: Five Essential Checks Before You Buy

Bidet Seat Fit: Five Essential Checks Before You Buy

A bidet seat is designed to fit onto your existing toilet, meaning the compatibility depends on your toilet's specifications. While most bidet seat listings highlight features like spray settings, remotes, and heated seats, they often overlook the crucial aspect of the toilet bowl shape. This can lead to compatibility issues after purchase.

Before making any financial commitment, here are five essential measurements you can take with a tape measure and a flashlight. If you satisfy all five checks, fitting a bidet seat should be a simple process. If you encounter one or two failures, there may still be options available; it just requires a different approach.

Wall hung toilet with an electronic bidet seat and wall flush plate on white hexagon tiles

Step One: Does Your Bidet Seat Match the Toilet Bowl Shape?

Bidet seats are specifically designed for distinct bowl shapes, so measuring your bowl is essential. Begin by removing the existing seat and measuring from the centre of the two mounting holes to the front edge of the bowl. This measurement is highlighted first in Toto's fitting guidelines, which clearly state: elongated bowls require elongated seats.

These two shapes are not interchangeable. An elongated bowl has a longer, oval shape, while a round bowl appears closer to a circle. If you are uncertain about the shape, jot down your measurement and compare it to the specifications of the bidet seat you are considering.

Toto’s guidance is tailored for the American market, so use their figures as a rough guideline. Always rely on your own measurements and the specifications provided by the manufacturer for models available locally.

Step Two: Measure Bidet Seat Hole Spacing and Cistern Clearance

A bidet seat requires proper alignment of the mounting holes and sufficient space behind it. Measure the distance between the centres of the two mounting holes, then measure from these holes to the front of the cistern or wall. Toto's fitting guidance specifies both distances, along with a minimum gap requirement between the mounting holes and the cistern. It’s also important to note that a cistern with a curved front can prevent the installation of a Washlet.

The measurements depend on the type of toilet you have:

  • Close coupled toilet: The cistern sits atop the pan, so measure from the mounting holes to the front of the cistern.
  • Back to wall toilet: The pan is flush against the wall, so measure from the mounting holes to the wall or to the cistern above it.
  • Wall hung toilet with an in-wall cistern: There is no cistern behind the seat, but the wall and flush plate are in close proximity, with water and power connections hidden behind the wall.

If the mounting holes do not align with your desired seat, search for a model whose specifications match your toilet.

Step Three: Is There a Cold Water Supply Near Your Toilet?

A bidet seat needs to draw water from the same supply that fills your cistern. Inspect behind or beside the toilet for the stop tap that supplies water to the cistern. Toto’s installation guide illustrates the setup: a T connector is installed at the base of the toilet, with the toilet’s supply line connected to one outlet and the bidet seat’s hose to the other.

This connection involves plumbing work. According to the NSW Government’s plumbing, draining, and gasfitting licence page, any plumbing work requires a licensed professional, regardless of the job's cost. The bidet seat may arrive at your doorstep, but the water connection is a task for a qualified plumber.

While inspecting the area, check the stop tap as well. If it feels stiff, is leaking, or shows signs of corrosion, mention this when scheduling your plumbing appointment. It is much easier to address such issues during the same visit than after the seat has been installed.

Step Four: Power Availability for Heated or Electric Bidet Seats

An electric bidet seat requires a power point near the toilet, which is not always available. Features such as warm water, a heated seat, and an air dryer all rely on electricity. Toto’s fitting tips emphasise the need for a powered outlet close to the toilet for their electric models.

If there isn't a power point within reach, you have two options:

  • A non-electric seat: As explained by Bio Bidet, non-electric seats operate solely on household water pressure, eliminating the need for an outlet. The water temperature will be at pipe temperature unless the model includes a second line for hot water.
  • A new power point: Installing a new power point constitutes electrical work. The NSW Government’s electrical safety page states that all electrical installation work must be performed by a licensed electrician, as DIY electrical work is both dangerous and illegal.

Resolve any power supply issues before ordering an electric seat. A seat that arrives without a nearby power connection will remain boxed and unused.

Wall hung toilet with an electronic bidet seat and side control panel on stone look tiles

Step Five: Is Your Bidet Seat WaterMark Certified?

A bidet seat connects directly to your drinking water supply, so it's vital to ensure it has WaterMark certification. The Australian Building Codes Board’s WaterMark Schedule of Products includes bidet douche seats among the products that require certification. It outlines that the Plumbing Code of Australia mandates certain plumbing products to be certified and authorised for use in plumbing installations.

Be particularly cautious with seats purchased online from overseas retailers. The ABCB’s WaterMark product search allows you to check a product by brand, model, or licence number. The licence number appears next to the WaterMark symbol on the product. Conduct this search prior to making a payment, not after the seat has arrived.

When Should You Consider a Full Bidet Toilet Instead of a Bidet Seat?

If your toilet does not meet one or more of the necessary checks, opting for a new toilet with a built-in bidet may be a more straightforward solution. This option typically arises in three scenarios:

  • The toilet pan is incompatible with any seat: Factors such as bowl shape, hole spacing, or clearance from the cistern eliminate the models you have considered.
  • Someone in the household requires a higher seat: A seat on a low pan does not change the height of the toilet. If ease of access is a concern, check our page on raised height toilets.
  • The bathroom is scheduled for renovations: If the toilet is outdated or the bathroom is undergoing renovation, it makes sense to incorporate the plumbing and electrical connections for a bidet toilet into the plans.

Replacing the entire toilet comes with its own considerations, from the waste pipe layout to the power supply location. We provide guidance on transitioning to a smart toilet.

If your toilet passes all five checks, you can place an order for the seat and arrange for a licensed plumber to connect it. Our dedicated bidet page outlines how Blue Rhino Plumbing installs bidet seats and smart toilets throughout Sydney.

Bidet Seat Compatibility: Frequently Asked Questions

Can any toilet accommodate a bidet seat?

No. A bidet seat must align with your bowl shape, match the seat mounting hole locations, and allow for adequate clearance between the mounting holes and the cistern or wall. Toto’s fitting tips caution that a cistern with a curved front may obstruct a seat's installation. Measure the bowl length, hole spacing, and rear clearance, then compare these figures with the specifications for your desired model before making a purchase.

Is a power point necessary for a bidet seat?

Only for electric models. Heated water, a warm seat, and a dryer all require power, so these seats must connect to a power point near the toilet. Non-electric models operate solely on water pressure and do not require power. If you wish to install an electric seat and there is no power point available, a licensed electrician must install one, as NSW law mandates that all electrical installation work be conducted by a qualified professional.

Can a bidet seat be installed on a wall hung toilet?

Often, yes, as long as the shape of the pan’s bowl and the mounting holes are compatible with the seat. The challenge with wall hung toilets is that the water and electrical connections are concealed behind the wall. A plumber will need to ensure that there is a water supply accessible for the seat’s hose and that an electric model has a nearby power point. Verify the availability of both connections before ordering the seat.

How can I confirm if a bidet seat is WaterMark certified?

Look for the WaterMark symbol along with the licence number printed on the product or its packaging. You can then search for this number, brand, or model using the Australian Building Codes Board’s WaterMark product search. Bidet douche seats are included in the ABCB’s list of products that require certification. If purchasing online, request the licence number from the seller and perform the search prior to payment.

Arrange for Your Bidet Seat Installation in Sydney

Have you completed the five checks but still feel uncertain? Keep your measurements handy when you reach out. Blue Rhino Plumbing consists of licensed plumbers operating around Ryde and throughout Sydney. We can assess whether a bidet seat is suitable for your toilet or if a new pan would be the more effective solution. Contact Blue Rhino Plumbing to schedule a consultation.

Original Article First Published At: Will a Bidet Seat Fit Your Toilet? Five Checks Before You Buy

WriteBuff, is proudly based in Australia, is a dedicated content syndication platform serving trade publications and niche professional audiences across sectors like construction, manufacturing, automotive, and more. Their mission is to amplify valuable trade content by distributing it to relevant, high-authority partner platforms, enhancing visibility and engagement for both authors and publishers.

Comments

No comments yet. Why don’t you start the discussion?

Leave a Reply

Your email address will not be published. Required fields are marked *