If your business prepares or serves hot food and discharges wastewater into the Sydney Water sewer system, you are required to have an approved grease trap, bucket traps in every preparation sink and floor waste, along with prior approval from Sydney Water before any discharge occurs.
After installation, the grease trap must be pumped out by an authorised Wastesafe transporter as frequently as stipulated in your service agreement.
This covers the basics. The subsequent sections of this article will delve into the operational details, the appropriate sizing of grease traps, and common mistakes that can lead to unnecessary expenses for food businesses.

Understanding the Necessity of Grease Traps
Fats, oils, and grease (FOG) do not remain in liquid form. They enter the sink while warm, cool down in the pipes, and solidify. The impact of one kitchen discharging these substances can be substantial. When countless kitchens across Sydney do the same, it leads to blockages and overflows in the public wastewater system, with some of that waste eventually contaminating rivers and oceans.
A grease trap functions by slowing down the wastewater flow and allowing it to cool, causing the grease to separate and float while the water continues to flow. Bucket traps installed in sinks and floor wastes capture food scraps before they can enter the sewer system. Together, these measures ensure that your waste does not become a communal issue.
Identifying Regulatory Authorities
Business owners often find the regulatory landscape confusing due to the involvement of multiple authorities.
Sydney Water oversees what can be discharged into the sewer system. Anything beyond standard household wastewater is classified as trade wastewater, requiring their approval for discharge. They also determine which grease traps are acceptable, the required size for your specific needs, and the frequency of pump-outs.
You can find the requirements listed on sydneywater.com.au, along with the installation guidelines.
Your local council also plays a role in regulating food businesses. Council inspectors evaluate your operations, including how you manage waste disposal.
If your business is situated outside the Sydney Water jurisdiction, your local water utility will assume the responsibilities of Sydney Water, and their requirements may vary.

Essential Requirements Before Opening Your Business
The first step is to obtain approval from Sydney Water. You will need to apply for permission to discharge trade wastewater through Sydney Water. Review the application process, and they will reach out to discuss your specific business needs.
The application process is free of charge. It is crucial to complete this step before purchasing or installing any equipment. Acquiring a grease trap that is not approved for your premises can lead to costly mistakes.
Next, ensure you have the correct pre-treatment systems in place for your kitchen. For most food businesses, this typically includes:
- In-sink bucket traps: installed in every food preparation sink.
- In-floor bucket traps: installed in all floor wastes located in food preparation and cooking areas.
- A suitably sized grease trap: selected from Sydney Water’s approved list and sized according to your maximum hourly flow.
Lastly, ensure that the grease trap is installed by a licensed plumber following the manufacturer's guidelines, Sydney Water’s specifications, and the Plumbing Code of Australia. Upon completion, your plumber should provide you with a certificate of compliance, which you must keep for your records.
We specialise in installing grease traps for cafés, restaurants, and takeaway shops throughout the Hills District and Northwest Sydney, covering areas from Castle Hill and Bella Vista to Rouse Hill and Marsden Park. If you are fitting out a new premises, contact us early so we can assist you with sizing and placement before you make any commitments.

Understanding Grease Trap Sizing
Sydney Water only permits grease traps with capacities ranging from 1,000 to 5,000 litres. Smaller units are inadequate for effectively capturing grease, while larger traps become increasingly difficult to clean and service. In cases where additional capacity is required, such as in a busy shopping centre food court, multiple traps may be necessary, with a combined capacity of up to 30,000 litres. Beyond this limit, a centralised treatment system, such as dissolved air flotation, must be installed.
Sydney Water provides guidelines on minimum sizes for various types of businesses. Here are a few examples:
- Cafés, snack bars, and coffee lounges serving hot food: 1,000 litres.
- Takeaway shops, food court outlets, pizza shops, and charcoal chicken: 1,000 litres.
- Restaurants with 1 to 69 seats: 1,000 litres.
- Restaurants with 70 to 199 seats: 1,500 litres.
- Restaurants with 200 to 399 seats: 2,000 litres.
- Restaurants and function centres with 800 to 1,000 seats: 5,000 litres.
- Supermarkets with a chicken cooker: 1,500 litres plus a grease removal device.
These figures represent minimum requirements, not targets. Sydney Water advises that you should size your trap based on your current and anticipated maximum hourly flow. If you plan to extend your operating hours or add equipment like a fryer, accommodating for that now will be more economical than having to excavate later. An undersized trap will fail to treat your wastewater effectively, potentially resulting in Sydney Water mandating additional pre-treatment systems.
Installation Standards for Your Plumber to Follow
The placement and connection of the grease trap are just as important as its size. Sydney Water’s regulations include the following requirements:
- All wastewater must flow to the trap: Wastewater from food preparation areas, floor wastes, kitchen sinks, dishwashers, and garbage disposal areas must all drain through the grease trap.
- Proximity to the kitchen: Long pipe runs can accumulate grease before reaching the trap. If unavoidable, measures like heat tracing or steeper pipe gradients can help mitigate this.
- Gravity drainage: The trap should rely on gravity to drain into the sewer. Pumped systems incur higher operational costs and risk overflow inside your premises if a pump malfunctions.
- Proper venting: Adequate ventilation is necessary for the wastewater to cool and facilitate grease separation. A poorly vented trap can run too hot, allowing grease to bypass the trap.
- Space above the trap: There should be sufficient clearance above the trap, at least equal to its depth, to allow access for servicing.
- Access for waste collection: Your waste removal contractor should be able to park nearby, and Sydney Water must have safe access for inspections. Multi-storey buildings may require a fixed pump-out line leading to street level.
Ongoing Responsibilities After Installation
Many people overlook this important aspect. A grease trap is not a one-time investment; it involves ongoing obligations as outlined in your agreement with Sydney Water.
Your agreement stipulates how often the trap must be pumped out, which depends on its size, the volume of waste generated, and its grease content. An authorised Wastesafe transporter must perform the pump-out, during which they will empty the trap, clean and scrape its internal surfaces, and scan a barcode on-site to provide Sydney Water with a record of the service. Keep in mind that Sydney Water charges a management fee for the Wastesafe system, and your transporter will bill you separately for pump-out and disposal services.
The schedule outlined in your agreement reflects the minimum frequency. If your trap is blocking or emitting odours before the next scheduled pump-out, it indicates that your kitchen is generating more grease than anticipated, warranting a discussion with us or Sydney Water.
You are also responsible for maintaining the trap’s functionality. Issues such as a damaged baffle, a cracked lid, or leaks indicate that the trap is not performing its intended function. Grease traps typically have a long lifespan, but they do wear out over time. Old traps that have stored grease for extended periods can be challenging to repair. A licensed plumber can advise whether repair or replacement is the better option. If you decide to proceed with repairs or upgrades, you must apply through Tap in to amend your agreement beforehand.
Notify Sydney Water of any changes to your operations as well. Adjustments to your menu, extended trading hours, new cooking equipment, or changes in business type can all affect what is required of you.
Common Pitfalls to Avoid
Certain habitual practices can violate your agreement or hinder the trap's effectiveness, often resulting in both issues:
- Disposing of waste oil down the drain: Used cooking oil should be collected in a container and sent off-site for recycling, never poured down the sink or grease trap.
- Using enzymes, bacteria, or odour treatments: Sydney Water prohibits the introduction of solvents, enzymes, natural or engineered bacteria, odour control agents, or pesticides in grease traps.
- Excessive detergent use: Detergents can break down grease, enabling it to pass through the trap. Using less detergent will save money and enhance the trap's efficiency.
- Installing garbage grinders or in-sink disposal units: These devices are not permitted in commercial premises, and Sydney Water can disconnect any business that installs them.
- Introducing other waste into the trap: Waste from equipment like vegetable peelers should not be sent to the grease trap.
Consequences of Non-Compliance
Sydney Water may take action against non-compliance, and repeated violations of your agreement can lead to serious consequences, including disconnection in the case of prohibited equipment. Local councils can also enforce compliance during food premises inspections.
The regulatory body is rarely the immediate concern. The primary issue often manifests as a blocked grease trap on a busy Friday, leading to unpleasant odours wafting into the dining area and halting kitchen operations until the blockage is resolved. Maintaining compliance and ensuring your kitchen runs smoothly are essentially intertwined responsibilities.
Frequently Asked Questions
Is a grease trap necessary for a small café?
If your establishment cooks or serves hot food, Sydney Water mandates a grease trap, regardless of the number of seating arrangements. For cafés, snack bars, or coffee lounges serving hot food, the minimum capacity required is 1,000 litres.
Who determines the appropriate size of my grease trap?
Sydney Water establishes minimum sizes based on the type of business, with the final size depending on your maximum hourly flow. We can assist you in determining the right capacity and guide you through the Sydney Water application process before you make any purchases.
Is it possible to install a grease trap on my own?
No. Installation must be carried out by a licensed plumber following the manufacturer’s guidelines, Sydney Water’s requirements, and the Plumbing Code of Australia. You should receive a certificate of compliance upon completion.
How frequently should a grease trap be pumped out?
The frequency of pump-outs is determined by your agreement with Sydney Water, based on your trap's size, waste volume, and grease content. If the trap is blocking or emitting odours before the next scheduled pump-out, the interval may be too long for your kitchen's needs, regardless of what the paperwork states.
Who is authorised to perform pump-outs on my grease trap?
Only an authorised Wastesafe transporter is permitted to conduct pump-outs. They scan a barcode at each service to ensure Sydney Water can track the waste from your premises through to its final disposal.
Is there a fee for applying to Sydney Water?
The application process through Tap in is free. Once you are operational, Sydney Water charges a management fee for the Wastesafe system, while your transporter will bill you separately for each pump-out service.
Can I use enzyme or bacteria treatments to reduce pump-out frequency?
No. Sydney Water does not allow the use of enzymes, bacteria, solvents, or odour control agents in grease traps, and these substances will not alter the pump-out frequency outlined in your agreement.
We have taken over a café that already has a grease trap. Are we automatically compliant?
Not necessarily. It’s important to reach out to Sydney Water through Tap in early to confirm whether the existing agreement and grease trap are suitable for your business, especially if your menu or hours differ from the previous owner's. Addressing this before your first inspection is significantly easier than rectifying issues afterward.
What if our grease trap is now undersized?
This is a common issue, especially following menu changes or extended trading hours. Upgrading the trap is possible, but you must first apply to Sydney Water to amend your existing agreement. Taking this step before undersizing results in regular blockages is advisable.
Achieving Compliance Effectively
Many grease trap complications arise from having a trap that is improperly sized for the business or a pump-out schedule that aligns more with administrative requirements than actual kitchen needs. In some cases, staff on-site may not know the correct contacts for assistance.
If you are launching a new food business, taking over a premises, or dealing with issues related to an inherited grease trap, consult with The Plumbing Paramedics. We specialise in the installation, servicing, and repair of grease traps for commercial kitchens throughout Sydney's Hills District and Northwest. We can provide insights into what your premises will likely require before any financial commitments are made. Reach out to us at 0430 054 007.
If you operate a food business in Sydney, you've likely been informed about the necessity of a grease trap. the specifics regarding who mandates this requirement, what you must do post-installation, and who will follow up for compliance are often not thoroughly explained.
This is the straightforward version.
Original Article First Published At: Grease Trap Requirements in NSW: What Your Business Actually Has to Do
