Gas Vs Electric Hot Water Systems for Your Sydney Home

Gas Vs Electric Hot Water Systems for Your Sydney Home

When it comes to choosing between gas and electric hot water systems, most homeowners in Sydney only consider their options when their current system fails, often on a chilly morning with a house full of people waiting for a shower. The reality is that there is no one-size-fits-all solution. Electric storage tanks are the most affordable to purchase and install, heat pumps offer the highest efficiency for electric options, and gas systems are ideal for homes already equipped with gas connections that require a reliable hot water supply for busy households.

Selecting the right system for your home depends on several factors: whether a gas connection exists, the number of people using hot water and their usage patterns, the available space for installation, and the presence of rooftop solar panels. This guide will help you evaluate these factors to streamline your decision-making process prior to having a plumber assess your current setup.

Essential Insights

  • Heat pumps consume significantly less energy compared to standard electric tanks or gas systems to heat the same volume of water.
  • Gas hot water systems require either a gas connection or space for LPG bottles.
  • Utilising rooftop solar can greatly lower the operating costs of electric tanks or heat pumps.
  • Switching from gas to electric or vice versa involves changes to pipework, power supplies, or flues, necessitating an assessment of the site before installation.
  • In New South Wales, any new hot water system installation must be conducted by a licensed plumber or gas fitter, and compliance certificates should be provided.
Plumber discussing paperwork with an older man at a kitchen bench

Comparing Gas and Electric Hot Water Systems

The following table outlines the primary differences between gas and electric hot water systems, based on guidelines from the Australian Government’s energy.gov.au and its Your Home guide.

Criteria for Comparison Electric Storage Heat Pump (Electric) Gas Continuous Flow or Storage
Initial Purchase and Installation Cost Lowest among the three options Higher initial purchase and installation cost Cost is more than electric tanks but less than heat pumps
Operating Cost Generally more expensive to operate unless powered by solar energy Cost-effective to operate Moderate to high operating costs
Heat Output Relative to Energy Consumption Just under one unit of heat for each unit of electricity Approximately three to five units of heat for each unit of electricity About three quarters to just under one unit of heat for each unit of gas
Requirements for Home Installation Needs power supply and space for the tank Requires outdoor space for the unit Requires a gas connection or LPG bottles, plus outdoor venting
Risk of Running Out of Hot Water Possible if the tank size is inadequate Possible if the tank size is inadequate Continuous flow units do not run out, but storage tanks can if undersized

Understanding How Electric Hot Water Systems Operate, Including Heat Pumps

Electric storage systems function by heating water through an element housed within an insulated tank—similar to a large kettle—and maintain the temperature until needed. According to the Australian Government, around half of Australian households use these systems. They are the most economical to purchase and install but typically incur higher running costs unless powered by rooftop solar.

Many electric tanks operate on an off-peak or controlled load circuit, allowing water to heat during periods of lower electricity costs. The Your Home guide suggests that tanks exceeding 250 litres are suited for off-peak usage, as smaller tanks may deplete their hot water supply before the circuit reactivates.

Heat pumps, while also classified as electric hot water systems, function differently. They do not heat water directly; instead, they utilise a fan and compressor to extract warmth from the surrounding air and transfer it into the tank. Government data indicates that heat pumps consume about 30 percent of the energy used by conventional electric systems. When considering heat pumps, keep in mind:

  • The compressor generates noise, so placement should be away from bedroom windows and neighbours.
  • An integrated unit can be mounted on top of the tank, serving as a straightforward replacement for an old electric tank.
  • A split unit separates the tank and the outdoor compressor, allowing for flexible placement of each component.

Electric instantaneous units are available as well, but the Your Home guide cautions that they draw substantial power and typically require a three-phase connection, which is unavailable in many households.

The Functionality of Gas Hot Water Systems in Sydney Homes

Gas systems heat water by combusting gas, either as it flows through the unit or within a storage tank. The most common type is continuous flow gas hot water, which heats water on demand as taps are turned on, ensuring that there is no shortage. These units are compact since they do not require a storage tank. In contrast, gas storage tanks heat water rapidly, allowing for a smaller tank size compared to electric systems. the government guide points out that these tanks can be particularly inefficient as heat can escape from the bottom where the flame is located.

Typically, gas hot water systems are installed outdoors due to venting regulations. Natural gas is supplied through the street network, while homes without this connection can operate on bottled LPG. The Your Home guide indicates that an LPG system generally requires two or more 45 kg bottles to avoid frequent replacements, and running costs for LPG systems can be two to three times higher than those for systems connected to natural gas.

Evaluating the Running Costs and Efficiency of Gas and Electric Hot Water Systems

Heating water constitutes a significant portion of a household’s energy consumption, with the Australian Government estimating it accounts for 15 to 30 percent of total household energy use, making it the second-largest contributor to energy expenses in the home.

The Your Home guide assesses systems based on the heat output relative to energy input. A heat pump delivers approximately three to five units of heat for every unit of electricity consumed, whereas a new electric storage tank provides just under one unit, and gas systems yield between three quarters and just under one unit of heat for each unit of gas. The guide identifies heat pumps as among the most economical systems to operate, while gas systems are often regarded as costlier to run. Households contemplating replacing a gas system are advised to consider efficient electric options. Gas systems are noted for their reliability and space efficiency.

Ultimately, your actual costs will depend on your electricity tariffs, the household’s hot water consumption, and whether you utilise solar energy. Homes equipped with extensive rooftop solar systems can operate an electric tank or heat pump using their own daytime power. The Your Home guide suggests this can lead to very low-cost hot water with minimal emissions. Conversely, homes with existing gas connections and no solar may find that a continuous flow gas system is a practical choice, especially when the household has frequent back-to-back showers.

Do You Have Access to a Gas Connection for Hot Water Systems?

Before opting for gas, the first consideration is whether your home has a gas connection. If you have a gas meter currently supplying a cooktop or an older gas hot water unit, then access is already available. switching to a continuous flow unit may require a larger gas pipe or meter to provide sufficient hot water for multiple taps simultaneously.

For homes that have never had gas service, a new connection can be requested through Jemena, the gas network provider, or via your energy retailer. Jemena advises that as of 1 October 2026, customers requesting new gas connections will be responsible for covering the full connection cost upfront. For homes without gas, this connection expense should be factored into the overall cost comparison alongside the hot water system itself.

Determining the Ideal Hot Water System for Your Household

Once you understand what your property can accommodate, the next step is for your household to make the final decision. We commonly guide Sydney homeowners through these critical questions when selecting a replacement:

  • What is the number of residents? The Your Home guide suggests a typical usage of about 50 litres of hot water per person per day, and undersized tanks can lead to running out of hot water.
  • When do household members typically use hot water? Multiple showers in quick succession during mornings favour a continuous flow gas system or a properly sized tank.
  • Do you have rooftop solar panels? Solar energy can make operating an electric tank or heat pump more economical.
  • What outdoor space is available? A heat pump requires an outdoor location, ideally distanced from bedroom windows.
  • Are you constructing a new home? In NSW, BASIX mandates energy and emission targets. The Your Home guide indicates that higher emission systems, such as electric storage tanks, might require solar installations to comply.

If your current system is aging but still functional, exploring your options now is advisable. The government guide reinforces this point: making a decision is far simpler when you're not caught in a cold shower waiting for a replacement.

Navigating the Switch Between Gas and Electric Hot Water Systems

Performing a like-for-like replacement is the most straightforward installation, as the necessary pipework and supply are already in place. Transitioning from electric to gas entails connecting the new unit to the gas supply and ensuring the appropriate flue is fitted, with careful consideration for safe venting. Conversely, switching from gas to a heat pump requires changes to the site’s needs; the outdoor unit must be positioned suitably, and new electrical circuits or power points will be necessary. We collaborate with trusted local electricians for these tasks.

Regardless of the direction you choose, the installation must adhere to the national plumbing standard for heated water services, AS/NZS 3500.4. Storage systems are required to heat water to at least 60°C regularly to prevent bacterial growth, such as Legionella, while a tempering valve must be installed to ensure tap water does not exceed 50°C to prevent scalding. In NSW, all plumbing or gasfitting work, including LPG, must be completed by a licensed plumber or gas fitter, no matter the project’s cost. Blue Rhino Plumbing holds NSW contractor licences 289152C and 356773C, ensuring that plumbing, gas connections, and flue installations are handled by a cohesive team, and you will receive compliance certificates for all installations.

For more information about the systems we install and replace, visit our hot water repairs and installation page, or learn about connections and compliance on our gas fitting page.

Common Questions About Gas vs Electric Hot Water Systems

Which is more economical to operate: gas or electric hot water?

The answer varies depending on the specific electric system in use. Government guidance indicates that heat pumps are inexpensive to operate, while standard electric storage tanks typically incur higher running costs unless they are solar-powered. Gas systems are described as having moderate to high operating costs. Your specific tariffs, hot water consumption, and solar energy usage will influence the final outcome.

Is a heat pump a superior option compared to gas hot water?

From an energy consumption perspective, yes. A heat pump can deliver approximately three to five units of heat per unit of electricity, whereas a gas system yields less than one unit of heat per unit of gas. While heat pumps have a higher initial cost and require outdoor space away from bedrooms, gas continuous flow systems are better suited for homes with existing gas connections that require a consistent hot water supply.

Can electric hot water systems operate on off-peak power?

Many electric storage tanks are designed to run on an off-peak or controlled load circuit, which offers lower rates. Tanks larger than 250 litres are best suited for this type of operation. Smaller tanks may run out of hot water before the circuit is reactivated. Certain heat pumps may only work with specific types of controlled load circuits, so it’s crucial to check the manufacturer’s instructions.

Are gas hot water systems required to be installed outdoors?

Due to venting requirements, gas hot water units are generally installed outdoors. Some models of gas continuous flow can be installed indoors, provided adequate ventilation is available. We assess possible locations for the unit and flue during our property evaluations.

Do I need a licensed gas fitter for gas hot water installation in NSW?

Yes, a licence or certification is mandatory for any plumbing, drainage, or gasfitting work in NSW, including LPG gasfitting, regardless of the project's cost. This includes connecting a new gas hot water system to the supply.

Contact Blue Rhino Plumbing for Expert Assessment of Your Hot Water System

If you are considering the pros and cons of gas versus electric hot water systems, your next step is to examine your existing system, gas supply, and the surrounding space. We will present you with the options that best suit your home and household needs, and handle the supply and installation of your chosen system, whether it involves a straightforward replacement, a heat pump, or a transition from electric to gas.

Blue Rhino Plumbing services all areas of Sydney, including Ryde, North Ryde, and Macquarie Park, with technicians available 24/7 for emergencies if your hot water system has already failed. To discuss your requirements, call 0468 014 771, email plumbing@thebluerhino.com, or submit an enquiry. Rueben and the team are eager to assist you in determining the best solution for your home.

Original Article First Published At: Gas vs Electric Hot Water: Which Hot Water System Suits Your Sydney Home

WriteBuff, is proudly based in Australia, is a dedicated content syndication platform serving trade publications and niche professional audiences across sectors like construction, manufacturing, automotive, and more. Their mission is to amplify valuable trade content by distributing it to relevant, high-authority partner platforms, enhancing visibility and engagement for both authors and publishers.

Comments

No comments yet. Why don’t you start the discussion?

Leave a Reply

Your email address will not be published. Required fields are marked *